One PIC Microcontroller Platform Development Board

Develop firmware using Microchip’s 8/16/32-bit PIC^® Microcontrollers all on one board!

Each device comes preprogrammed with firmware to operate the LCD, LED and capacitive touch pads. In addition to three PIC^® Microcontrollers, this board also has a dedicated Real-Time Calendar Clock circuit and is able to run from a single AAA Ultimate Lithium battery.

Feature

PIC Microcontrollers

PIC16LF1939-I/PT

PIC24FJ256GA106-I/PT

PIC32MX795F512L-80I/PT

Capacitive Touch Pads

Segmented LCD

Colored LEDs

Single Cell Battery Supply

MCP1640T-I/CH

Real-Time Calendar Clock

1 MCP79410-I/S

PICkit™ 3 Connector

PICtail™ Board Connector

System Requirements:

Software:

• MPLABX  V1.00
• .NET Framework v2.0 or later (required for 8bit IR Demo GUI)
• MCP2200 & SimpleIO-M.dll (required for 8bit IR Demo GUI)

Drivers:

• MCP2200  (Downloaded)
• ZENA Wireless Adapter (Provided)

Compilers ( use latest available versions):

• PIC16 HI-TECH: (developed with v9.83)
• PIC24 C30: (developed with v3.31)
• PIC32 C32: (developed with v2.01)

Overview:

This demo board is populated with 8bit, 16bit, and 32bit PIC microcontrollers. Refer to the schematic of the board for more details.

8 bit MCU : PIC16LF1939

16 bit MCU: PIC24FJ256GA106

32 bit MCU: PIC32MX795F512L

OnePIC Demo Board

The demo code consists of:

1. A “base” code which demonstrates the
   1. LCD
   2. LEDS
   3. mTouch
   4. Potentiometer
   5. Switch
2. Three Wireless Demonstrations, one for each PIC
   1. 8bit – Infrared
   2. 16bit – RF4CE (Radio Frequency for Consumer Electronics)
   3. 32bit – WiFi

The following document is intended as a walk-through guide to using the provided software.  Items will be presented in the order they might be presented during a demonstration of the OnePIC board.

For more detail: One PIC Microcontroller Platform Development Board

The post One PIC Microcontroller Platform Development Board appeared first on PIC Microcontroller.